{"id":167,"date":"2012-01-06T18:21:32","date_gmt":"2012-01-06T18:21:32","guid":{"rendered":"http:\/\/www.northsuburbanelectric.com\/chicago-electrician\/?p=167"},"modified":"2020-08-26T09:07:33","modified_gmt":"2020-08-26T15:07:33","slug":"clear-confuseion","status":"publish","type":"post","link":"https:\/\/www.northsuburbanelectric.com\/chicago-electrician\/panel-upgrades\/clear-confuseion\/","title":{"rendered":"Let’s Clear Up the Con-Fuse-Ion"},"content":{"rendered":"

\"ChicagolandEvery Chicagoland home has an electrical switchboard<\/strong><\/a>. It protects the electrical wiring system<\/strong> in your home. As part of your home maintenance checks<\/strong> or when you are doing your next renovations, have a look inside your switchboard. This is where the main power switch, along with a number of fuses or circuit breakers<\/strong> are located. Each fuse or circuit breaker connects to a different area of wiring in your Chicagoland home. If an electrical fault occurs, the fuse will blow<\/strong> or the circuit breaker will trip<\/strong>, cutting off the power preventing overloading or household fire. A circuit breaker can be switched back on, whereas once a fuse blows it must be replaced with a new one.<\/p>\n

Always turn off the main power switch if you are changing a fuse as well as turning off all electrical appliances and light switches that are connected to the blown fuse. Replace the fuse with the correct current rating. Too high a current rating will cause excessive current to flow through the circuit. Overheating and possibly fire can occur.<\/p>\n

If a fuse keeps blowing, get hold of your professional Chicagoland electrician<\/strong><\/a>. There may be hidden electrical problems that you won’t have picked up. If possible, swap the fuses in your switchboard with plug-in circuit breakers<\/strong> of the same rating, as these are safer to use and do not require replacing.<\/p>\n

Find out what electrical switches and appliances the fuse or circuit breaker protects. Switchboards are normally labeled for easy identification. If not, ask an Chicagoland electrician to do this for you. This can save you time in identifying a blown fuse or which circuit breaker to switch off.<\/p>\n

How to Replace a Fuse<\/strong><\/p>\n

Follow these steps:<\/p>\n

1. Turn off the main power switch at the switchboard.<\/p>\n

2. Look inside the switchboard for a list of where each circuits and each fuse connects to.<\/p>\n

3. If it is not obvious which fuse has blown, inspect each fuse one at a time.<\/p>\n

4. Once you have found the blown fuse, switch off lights and unplug all appliances on that circuit.<\/p>\n

Replace the fuse wire. Make sure you use the correct current rating fuse wire. The current rating is generally indicated on the front of the fuse carrier.<\/p>\n